Home Renovation – Geeky Girl Engineer

Blanket + Doorknobs = Window Treatment

Posted on December 15, 2019 by geek

Previously I made a unique window treatment in the form a wooden dowel with antique glass doorknobs glued to the end of it and a shawl or tablecloth. I still am not sure what the textile is meant to be. It could be a tablecloth or shawl or something else entirely. It is very pretty, and I like it. However after having it up for several years now, I decided I needed a change. The textile was too thin for a curtain in that it let too much light in, and I am not completely positive how much privacy it brought. Also it was just barely able to cover the window.

Last year I bought a tablecloth or blanket in Mexico that I love. I wasn’t sure what to do with it though. I finally decided it would make a perfect new window treatment for my window. I hung it up to replace the other textile. It was perfect for privacy and size. Now the problem became that it was a bit too heavy and causing the dowel to sag a bit too much. So, I bought a cheap curtain rod that would provide more strength and not sag from the weight. I removed the rod’s plain ends and glued the antique glass doorknobs to it. Now I once again have my glass doorknobs and a unique curtain to go with it.

Building a Spice Rack

Posted on June 14, 2015 by geek

old spice rack

Here is the back story. The above photo is a spice rack I bought at IKEA. It was raw wood, and I painted it to match the wall. My initial intention was to see if I liked it there, then buy two more to place on either side if I did. I decided I did like it, but when I went to go buy two more, I couldn’t find them anymore. Then I realized, well this is stupid, I can just build a spice rack. Thus without further ado, how I built a spice rack.

The building supplies consisted of two primed, composite wood 1 x 4’s (which are really 0.75″ x 3.5″), primed 0.25″ x 0.75″ shoe molding, flat head screws, and wood glue. I cut the wood planks to fit the length of the wall, and I cut the molding into three pieces, one, the length of the planks and two, the length of the depth of the planks. Then I mitered the molding. The molding will serve as a shelf stop to make sure nothing falls off the shelf, in theory at least.

Building supplies

First, I joined the two planks to form an “L” shape.

Two planks joined

I used screws to attach them together. Before inserting the screws, I pre-drilled holes and also pre-drilled a larger hole the size of the screw head at the very top of where the screw would go, so that the screw head would be recessed into the wood. The side where the screw head is, will be the top of the shelf, and plank perpendicular to it will be the way I attach it to the wall.

Screws used to join two planks

Then, I glued the long piece of shoe molding to the top of the plank, on the opposite side of the perpendicular plank.

Long stop piece glues and tape so it won't move while glue dries

Long stop piece glued and taped so it won’t move while glue dries

I then glued the two small pieces of shoe molding to the ends of the planks to complete the shelf stops. I used painter’s tape to keep the molding in place while the glue dried.

Tape pieces so they don’t move while glue dries

All pieces now joined, tape pieces so they don’t move while glue dries

Once the glue dried, I then used spackle to fill in the gaps and also the indentions where the screw heads are to make the shelf look more like one finished piece.

Sparkle used to fill in holes and gaps

Spackle used to fill in holes and gaps

I then painted the entire piece with the same paint that I used to paint the wall. Obviously it could be a different color, but I like how it seems to just be part of the wall when it is the same color and not some attention grabbing piece. I then hung it on the wall using more flat head screws that I screwed into the studs.

Completed rack hung on wall, notice recessed screw heads

Completed rack hung on wall

I then filled in the volumes above the recessed screw heads with spackle.

Spackle used to fill indention from screw heads

Finally, I sanded the spackled areas and painted. Below, my finished, custom built spice rack.

Finished spice rack

Half Bathroom Renovation Finished

Posted on January 26, 2015 by geek

I have finished renovating the half bathroom! It is pretty much the last room in the house that needed renovation. [I say pretty much because I still have a few projects I want to do in the laundry area and storage room.] The plumber installed a new toilet and also the vanity. I bought a vanity that came with a white glass countertop, a white ceramic vessel sink, and a matching mirror. All it needed was the faucet. I installed a new three-bulb vanity light and also replaced the outlet and wall switches for new white ones. I also installed two glass shelves above the toilet. Finally I replaced the door hinges and door knob with hinges and a lever that match the rest of the house.

Full view of half bathroom

New toilet

New vanity and matching mirror

New vanity with vessel sink

New glass shelves, mirror, and vanity light

Half Bathroom Reconstruction

Posted on January 13, 2015 by geek

Reconstruction of the half bathroom is partially done. I hired a contractor to remove the second layer of subfloor and then lay concrete backer board so that I could lay tile. The contractor also placed new green board in to fill the whole from the old medicine cabinet and also use drywall mud on the walls to smooth over the texture left from the old wallpaper. After the contractor finished, I primed and painted the walls and ceiling and laid a new tile floor. I painted the walls the same blue color as the accent wall in the dining room, and the ceiling is the same pale blue as the ceiling in most of the house.

Patched and smoothed walls

New concrete backer board subfloor

Newly painted walls and ceiling

New tile floor

New marble transition and new tile floor

Half Bathroom Deconstruction

Posted on December 31, 2014 by geek

Sadly, with this phase of renovation, there was no drywall demolition. I say sadly because drywall demolition is one of my favorite activities. Deconstruction is now finished. The plumber came in first and removed the toilet and disconnected the sink. I removed the wallpaper, tile floors, the vanity, and all the fixtures. I then had a contractor come in and remove the second layer of plywood subfloor which only went around the old vanity. As with previous rooms I have renovated, at some point, “renovators” came and removed the old floor, but only around the old vanity, then put in another layer of plywood subfloor for no discernible reason, and then tiled. Thus everything had to come out to get to the original subfloor.

Old tile floor

Old tile under the vanity still present

Demolition (almost) complete

Hole left from medicine cabinet

Vanity removed and tile removed

Phase 4 Home Renovation Begins

Posted on December 30, 2014 by geek

The (possibly) final home renovation phase has begun. This will be a rather small and hopefully short phase. The only room involved is the half bathroom off of the living room and kitchen. So first some photos of the bathroom before renovation. The vanity cabinet is the exact same style and color as the old kitchen cabinets were. I did not realize it until I took it out, but the mirror above the vanity was actually a medicine cabinet.

Looking into the bathroom from the living room

The old vanity and medicine cabinet

Old vanity

Looking out to the living room

Master Bathroom Renovation Is Finished!

Posted on May 11, 2014 by geek

The master bathroom renovation is finally completely finished. The bathroom is small, but it has all the features I need and want. It is functional, and I love it. I previously wrote about the cabinets, but the final piece, an open shelving unit that sits on top of the countertop has been installed. All the cabinetry is from Tuscan Hills, and while most of it is standard cabinetry, some of it, especially the false bottom of the wall cabinet for access to the bath mechanics is custom. The tub is an MTI Andrea 14, and I must admit, after having taken a bath in it, it is even bigger than I realized, but it has whirlpool jets and air bubblers and is quite lovely in which to soak. I used frameless glass for the shower and simple, clear glass vessel sinks, so that visually they take up as little space as possible. I previously wrote and posted more detailed photos of the shower, so I am not posting too many here. The plumbing fixtures are all Grohe’s Atrio line. I used Moen’s Iso line for the towel bars and rings, robe hooks, and toilet paper holder, and I used Thomas Lighting’s Pittman fixtures for the vanity lights and wall sconces in the water closet.

Newly renovated master bathroom

Shower

Tub

Wall cabinet next to the tub

Water closet

Vanity

Open shelves on the vanity

One of the sink areas

Vanity faucet

Vanity lights

Vanity Backsplash Tiled

Posted on April 21, 2014 by geek

This weekend I tiled the vanity backsplash. It is a rather high backsplash as I wanted the tile to go at least as high as the wall faucets. I wanted to tile a border around the recessed medicine cabinets, so I decided just to bring the backsplash up to the base of the medicine cabinets. Also, I changed the original design for tiling in the shower, and I have a bunch of left over glass tile, so I might as well use it. The height of the marble tile was determined by the height of the electrical box because I wanted the same tile type surrounding the electrical box, so the cover would lay flat.

Tile frame for medicine cabinets

Tiled vanity

Tiled vanity. Tiling stops before corner where shelving unit will be.

Shower is Finished

Posted on April 20, 2014 by geek

The frameless glass shower wall and door have been installed. I had the glass company place a floating robe hook on the shower wall next to the door, so I could easily grab a towel when I get out of the shower. Also, on the glass front, the new bathroom window has been installed.

All the shower plumbing fixtures have also been installed. Most of the fixtures come from Grohe’s Atrio line. There is an multifunction rain shower head placed in the ceiling and a handheld shower head on a adjustable bar. In the photo below, the valve on the far left is the thermostatic valve that adjust the temperature for both shower heads. Then on the right are the flow valves that turn the shower heads on, the top one for the overhead head and the lower one for the handheld head. Thermostatic valves are a really nice feature because you don’t have to constantly find the right temperature in between showers, and they ensure the same temperature water comes out of multiple heads. I have already used my new shower, and it is glorious! The area is wonderful, nice and spacious but not so big to be insane, and the the bench is a necessity for any woman who shaves her legs.

Shower fixtures

Shower glass wall and door

Shower glass wall robe hook

Shower glass wall and door

Shower glass wall and door in place

New window

Vanity Countertop

Posted on April 17, 2014 by geek

One nice thing about buying a stone slab for your countertop, is that if you have to buy the whole slab, you can request to view and alter the layout of the slab cut out. I found a gorgeous sky blue piece of marble with fluorite crystals in it. Fluorite is my favorite mineral, and the blue goes wonderfully with my green marble tile that will be used as the backsplash. The slab was meant to be mine, and I can never move from my house now. It has now been installed in my bathroom, so this weekend, I will be tiling the backsplash.

Laying out slab (yellow tape shows where the cuts will be)

Vanity countertop

Countertop crystals