Nature, travel, pets, home renovation, and geekery
I live about a mile from my veterinarian’s office. While I can drive there, the parking situation is kind of annoying. Often if it my dog that has an appointment, we will walk there. If a cat needs to go, I will just take the bus. Puck, my 17 year old, very laid back cat, needed to go today. I have taken him to the vet before in the car where I just stuck him in a shoulder bag because, seriously, he doesn’t care and won’t try to escape. He will stick his head out to observe, but he seems to like the adventure. I really need to get a soft over-the-shoulder carrier because they are so much easier to use than the hard bulky carriers that I have. Today I decided to take him on the bus via a shoulder bag that can be zipped up. I think he enjoyed today’s adventure. Here he is on the bus to the veterinarian.
He did have to come out of the bag at the vet, so he could get his blood drawn and be examined. Once it was over, he happily returned to the bag while I paid the bill.
Then he rested on the bus ride home. I am fairly sure no one on either bus realized I had a cat with me. [Pets are allowed on the bus as long as they are secure.]
Evidently, Bic has decided that women can’t use normal pens and has decided to market a pen specifically for us. “Bic for Her” they call it because we need more pink crap. [I am not the only person who finds this demeaning and stupid. They have been inundated with sarcastic reviews on Amanzon.] I tweeted my indignation about this, and I asked what else do they think women need especially for us. You know, pink stuff. Do we need special hammers and power drills? I was quickly informed that the pink insanity does not stop with pens. There really are tools marketed especially for women, and yes they are pink. There are Little Pink Tools, which quite frankly make me want to hurl. There is also Tomboy Tools, which seems to be almost anything as long as it is pink. As if women can’t or won’t use something if it is not pink.
To be clear, I actually like the color pink. I use it in doses in my home decorating, and I have plenty of pink clothes, shoes, and jewelry. It is not my favorite color though. Pink does not mean something is “girlie,” and something does not have to be pink to be feminine. I am sure plenty of little girls love the color pink, but not that many women do. Women don’t need pink things just like girls don’t need pink legos or any other pink toy just for them. You know what kind of legos little girls like? They like legos, plain and simple. We could do a lot to end gender stereotyping if we stop shoving pink frilly stuff at girls and “manly” toys like guns and trucks at boys. If a girl likes pink and frilly stuff then great, but don’t assume just because she is a girl that that is what she wants and wouldn’t want to play with trucks and other stuff. And vice versa for little boys.
My sophomore year of college I moved into an apartment with several roommates. While moving in, I needed some basic tools. I think I was putting together a desk or something. I went to Walmart, and I bought a toolkit called Do-It-Herself. Yes, it was actually called this, and all the tools had baby blue handles, except for tools like the socket wrench, which were pure metal. I didn’t buy it for the silly name, and I certainly didn’t buy it because everything was matching baby blue. I bought it because it was a toolkit with a nice selection of basic tools that came in an organized, easy to store carrying case. I actually still have many of those tools, including the pliers, socket wrenches, and screwdriver. I still have some of the screwdriver bits too, but of course the philips bit has been replaced numerous time. It was a nice toolkit that fit my needs at the time. Looking back, I guess I should be happy that it wasn’t pink because evidently companies have decided that’s what we really want.
I am currently renovating the third house I have ever owned. I have renovated all my houses. With each house, the renovations have gotten more intense, and I have done more and more of the repair and renovation myself. Over the years of home ownership, I have bought more tools and replaced old ones or upgraded to better ones. Years ago, I bought a power drill and small drill bit case with bits of about ten different sizes. It served most purposes. Then years later, I bought a drill bit case with about 30-40 different sizes of bits. Last year I bought a circular saw, reciprocating saw, and a rotary tool. I’ve rented those before, but if you do enough renovation, it is cheaper in the long run to just buy them. You can also buy higher quality power tools than you can rent. Also when you rent, you have to buy your own blade anyway. And no, none of the tools I have bought since that original toolkit have been baby blue or pink or any other girlie color. I don’t buy tools because of how they look. I buy, or try to buy, tools that will last, that will work well, and that are reasonably priced. I would never buy a pink tool, partially because it is stupid, but also because if the tools is being sold because it is pink, then it is probably not being sold because it is a good quality, reasonably priced tool.
In short, women don’t need pink tools! We need good quality tools with easy to understand directions. We want them reasonably priced and easy to use. In the case of power tools, we want them to come to come with safety features, so we or anyone else who uses them doesn’t injure themselves. In short, we need exactly what men need.
For the record here are my tools, or almost all of them at least. You will notice a few baby blue ones from my original, aforementioned toolkit. However, not a single pink one among them.
My manual and power tools
I need advice from someone who has painted a baseboard that has a stained wood quarter round in front of it. [See photo below.] I can’t figure out how to paint it without getting paint on the quarter round. I have tried to tape the quarter round with painter’s tape, but it is not a perfect seal, and paint gets below the tape. I have tried holding a painter’s metal straight edge on top of the quarter round, but that also does not give a perfect seal. Once the paint gets on the quarter round, if it is still wet, I can wipe it off with a wet rag. Problem is that the paint is also wet on the baseboard, and it is impossible to just wipe the paint off the quarter round and not constantly pick up wet paint from the baseboard. I have had some luck scrapping the latex paint off the quarter round once it is dry, but if I scrap hard enough to remove the paint, I risk damaging the wood. Thus, does anyone have any advice on what to do?
I painted the short wall in the kitchen with latex paint over the magnetic primer. The magnetic primer adds texture to the wall, probably because of the metal particles in the primer. It’s not too much texture, but the wall is definitely not smooth. I ended up putting about four coats of primer on the wall, so that added to the texture. After all those coats, the wall is not that magnetic. [Technically the the primer itself is not magnetic, but supposed to be attractive to magnets, but I am calling it magnetic for simplicity.] It will attract magnets, but it needs to be a strong magnet with not a lot of weight on it. I have some plastic clips with magnets on the back. They are attracted to the wall, but it is not a strong enough attraction to keep them on the wall. I have another magnet with three plastic hooks on the front. It will stick to the wall with a potholder hanging from it but not with the potholder and an oven mitten also. In summary, the magnetic primer is neat, but it’s not great. Here is a photo of how the wall looks now after the paint. The paint is Behr interior flat Garden Medley (470B-5) from Home Depot. The aforementioned magnet with plastic hooks is on the wall in this photo with the potholder hanging from it.
One wall of my kitchen is sort of a half wall. It is full height, but only about five feet long. I decided to turn it into one giant magnetic board. All my appliances are stainless steel, so magnets won’t stick to them. It’s kind of nice being able to use magnets in a kitchen, so the only option was to make a wall a magnet board. I used magnetic primer, which is nice because then you can paint on top of it. So now the wall looks like this covered in magnetic primer.
The only problem with this primer is that it is not latex. I thought it was water based because it says you can paint latex paint on top of it. However latex paint is easy to clean up. This stuff is not. Also, it does not come off skin easily, and my arm now looks like this.
This weekend I tiled the kitchen backsplash, and what a task that was. I used four different types of tiles, which I posted about earlier. I started by covering the countertop with plastic, and then laying out the tile determine how to space accent tile and stainless steel tiles.
I then start cutting out random glass tiles from the mosaic pieces to substitute the stainless steel tiles. I also cut squares of stainless steel tiles which would surround and highlight the accent tiles.
I used glass tile mortar because for the obvious reason that I was using glass tile, and other types of mortars have trouble sticking to glass tile, especially the handmade tile that had no mesh backing. Maybe I am remembering tiling my downstairs bathroom last year through rose-colored glasses, but glass tile mortar seems to harden faster than the normal, pre-mixed mortar I used last year. It took me about nine full hours to layout all the tile, cut out all the glass tiles to substitute in the stainless steel and accent glass tiles, spread the mortar, place the tiles, and also cut tiles where need be. Through a little bit of luck and planning, I was able to minimize the number of tiles I needed to cut. The glass tiles could be cut somewhat easily though tediously with manual scoring tool. I did have to cut a few of the stainless steel edging tiles. I used my Dremel rotary tool with the metal cutting blade. I was going to use the metal cutting blade to cut through the stainless steel exterior, and then switch to the diamond tip tool for the ceramic interior, but it turns out the metal blade can cut through the ceramic fairly well, or at least good enough for what I was doing. By late Saturday night, all the tile was in place.
For the grout, I used epoxy grout. Grout with sand could have scratched the stainless steel, and epoxy grout was recommended for glass. Also, epoxy grout is supposed to be nice for a kitchen since it doesn’t stain the way normal grout can. The problem with epoxy grout is, when they say it cures faster than normal grout, they are not kidding. Seriously, the stuff cures fast. Even placing the bucket in the freezer while cleaning the section I just grouted only helped a little bit. If you use epoxy grout, you really have to work in small sections. Grout a small section, stick the grout in the freezer, then clean the section you just grouted. Clean it with water with dish soap in it, and just plan to use sponges that you will throw away. The epoxy will stick to the sponges and not come out. Also, epoxy grout sticks to your skin, like you wouldn’t believe. The grout I bought actually came with a pair of latex gloves, but I think those are for when you are mixing the two parts. You mix two parts that cause an exothermic (produces heat) reaction, and I guess the gloves are to protect you during that reaction. I don’t know, but I couldn’t wear the gloves the whole time because I was sweating, and I would need to change them. The summary is that epoxy grout is not fun to use, so don’t use it unless you really need it. If you do, I would highly recommend two people: one to grout and one to clean the area that was just grouted.
As a side note, the color grout I used was Delorean gray. I chose that color because I thought it would match the stainless steel the best, and any color gray would compliment the glass tiles nicely. The side benefit is that if I fit the oven with a flux capacitor, I can turn the kitchen into a time machine. Actually the oven is already so high tech, not to mention all digital, that perhaps it already has a flux capacitor. So forget Hot Tub Time Machine, I could have a kitchen time machine which I think would be quite a bit more useful. Burn your roast? Use the kitchen time machine to go back in get the roast out of the oven faster. Have a new recipe, and not sure if you will like it? Go to the future and find out. Actually that might not work. That might be like the kill your grandfather paradox. Still you could go back in time if you forget to add an ingredient or something. It could be quite practical.
But I digress, here are photos of the finished tiled backsplash. The area behind the cooktop has three different accent tiles, which like all the accent tiles are outlined in stainless steel tiles.
Here is a close up of one of the accent tiles.
I wasn’t sure what to do with the overhand countertop. I needed to continue the edging tile to cover the gap between granite and the wall, but I didn’t want to continue the field tile out past the upper cabinets. I finally decided to stop the field tile at the end of the cabinets but just continue the edging tile row out to the end of the granite. I think that the best choice.
Finally here is a wide angle photo of the tile in place.
I’m continuing a series of posts about different aspects of my new kitchen, which still isn’t finished, but I am just happy with already. Green is my favorite color, and green will be showing up in my kitchen and the rest of my house quite a bit. I am using green for some of the permanent features because it has some neutrality to it, and I think it complements the wood floors and cabinets nicely. The kitchen countertops are green granite, specifically it’s called Verde Butterfly. It is dark green with large, lighter green crystals as seen in the photo below.
For the kitchen cabinet handles, I used satin nickel modern arch cabinet pulls from Amerock. I used only handles on both the drawers and the doors. I didn’t use knobs at all. I chose these handles partially for their simplicity but not so simple to be boring. The arch also matches the arch of the appliance handles on all the new appliances. Thus, the handles on the cabinets compliment the handles on the appliances, but they don’t match it so exactly to be too monotonous.
All my tile has arrived, and I hope to tile the backsplash of my kitchen this weekend. I am very excited about getting this done. I will be using glass tile and stainless steel tile. Most of the tile will be the green glass 1 inch by 1 inch mosaic tile pictured below. It is Olive Green, Multi Color Clear Glass Mosaic (D007) from Vivagi Corp.
I plan to remove a few tiles from each 1 square foot section of the green glass tile, and substitute in a few stainless steel tiles pictured below. They are stainless steel (covering ceramic) mosaic tiles from Glass Tile Oasis.
I will also be using stainless steel tile to edge the backsplash. I am using liner stainless steel tile also from Glass Tile Oasis. The edging tile is pictured below.
Generally when tiling a backsplash you only really need edging tile for the vertical ends. I will also be using it on the bottom edge where the tile meets the granite countertop. The reason for this is that like pretty much every house out there, my walls are not completely straight or flat. While the granite was cut in a straight line, the wall is not, so the space between the wall and granite varies. The field tile is only about 0.25 inches think, so in some places, the tile does not cover the gap between the granite and the wall. Thus I am using the thick edging tile to make sure the gap is filled as demonstrated in the photo below.
I love adding unique pieces into my decorating. I love functional art. So for my kitchen I am using two different types of handmade, functional art. I will be using two different styles of handmade glass accent tiles. A few are cobalt blue with little silver squares, and the others are variated jade green which will pick up the lighter green in the green granite countertops. I bought these tiles from Uneek Glass Fusions which has absolutely fabulous glass functional art. The two types of accent tiles are pictured below.
I actually initially was looking at Uneek Glass Fusion because I was trying to find some unique pendant lights. I found the jade green tile above, and I asked if I could get a pendant light made with that same glass, since the owner does special orders. So I special ordered the pendant lights and then bought some tiles to match the lights. The glass pendant light covers are pictured below. I bought three. One will hang over the island, and two will hang over the peninsula.
