Nature, travel, pets, home renovation, and geekery
After visiting the Green Mountain Audubon Center, we visited the Richmond area and also went north of Burlington to the area where the Winooski River flows into Lake Champlain. The area is really pretty, and of course Lake Champlain is gorgeous.
Sunflower
Coneflowers
Buttonbush
Cute little frog (I think my silhouette is actually reflected in his eye)
Winooski River delta
Lake Champlain marshy area
Lake Champlain
I came to Vermont for a conference, but I arrived a day early to do a little sightseeing. One place we visited was the Green Mountain Audubon Center outside Huntington. It is a really lovely place to wander around for several hours. It has a hemlock swamp, a gorgeous river running through it, forests full of ferns, and lots of pretty flowers. We also saw a few nice birds, and I saw some really cool looking insects, which I cannot identify.
Fern forest
Huntington River
Swamp
American red squirrel
Beetle?
Chestnut-sided Warbler
Fern frond
Milkweed
Insect
Flower
I think I have written blog posts before about how much I love traveling my train. I love sitting back and watching the world go by. Train travel also sometimes allows you views you could not get any other way. I recently took the Amtrak Vermonter from Washington, DC to Burlington, VT. The latter part of the trip had wonderful views of the Connecticut River and rural Vermont and New Hampshire. It was a wonderful way to start my trip. Here are a few photos from the trip.
Triborough Bridge (East River) in NY
Crossing the Connecticut River near Windsor Locks, CT
Bridge over the Connecticut River near Northfield, MA
near Bellows Falls, VT
One of the really nice perks of living in the Washington, DC area is viewing the Independence Day fireworks over the National Mall. I set up on the Mt. Vernon trail where I could get the Lincoln Memorial, Washington Monument, and Capitol (and in a few photos the Jefferson Memorial) in the same frame on wide views. Without further ado, here are some of my photos from last night.
Last week I attended 40 hour HAZWOPER training. HAZWOPER, an acronym for Hazardous Waste Operations and Emergency Response Standard, is OSHA mandated training for employees who may potentially be exposed to hazardous substances and who are engaged in cleanup operations or other certain other activities involving hazardous waste. Normally I work in an office, and the closest I come to hazardous materials or waste is sitting at a computer and analyzing data from hazardous waste sites. However, there is a possibility that I may sometimes be asked to go to a site where HAZWOPER training would be necessary, and I had an opportunity to take the training, so I did.
HAZWOPER training includes topics such as basic chemistry, toxicology, biology, radiation, environmental science, analytical sampling, and law and regulations. Truthfully, I could have taught a good portion of the training. It also includes hands on training with some of the sampling methods and instruments that are used in the field. Personally, I think playing with instruments and sampling materials is fun. As part of the training, you are required to get dressed in various personal protective equipment (PPE) that would be required under various circumstances at sites. In general, you look rather ridiculous in the PPE, but of course PPE is not supposed to be fashionable or make you look good, it is supposed to protect you from hazardous materials that could kill you or cause injury or illness. What PPE does not do, is keep you cool. It was in the 90’s °F when we were dressing in the PPE. While the suits protect you from most hazards, ironically they can cause potential health hazards if you over heat. There are different levels of PPE that are used depending on what the potential hazards are. The most protective is Level A, which is a fully encapsulating chemical-protective suit with positive pressure, full face-piece self-contained breathing apparatus (SCBA), inner and out gloves, and boots.
Me in Level A PPE
The next level, Level B PPE, is slightly less protective and includes chemical-resistant coveralls instead of the fully encapsulating suit, as well as SCBA, inner and outer gloves, and boots.
Me in Level B PPE
The next level, Level C PPE, is less protective still. It includes an air purifying respirator instead of SCBA, but other than that is fairly similar to Level B.
Me in Level C PPE
There is one final level, which is Level D PPE, which is minimal protection from physical hazards but does not include respiratory protection. This may sound strange, but if it is hot, Level A is actually easier to wear than B or C. The fully encapsulating suit is roomier, and the compressed air is continually blowing through your mask and then through the suit itself before it exits an exhaust vent. This air flow helps to cool you. In the chemical resistant suit for Level B and C, I just felt like a turkey that had been baked in a cooking bag. Side note, the SCBA tanks we used were made of a composite material and weighed about a third of the weight of the metal SCUBA tanks I have worn before. Also, for as cumbersome as it was to get dressed out in all the PPE, I think it was easier to dress in and walk around in the PPE compared to the SCUBA drysuit I was wearing a month beforehand while SCUBA diving Silfra. Obviously once underwater, the tank weight is negligible, and the drysuit becomes less cumbersome, but above water, they are really difficult to get into and move.
For HAZWOPER training, you don’t just have to get dressed in the different levels, you need to get used to actually moving and doing various tasks in them. Hence, when we first wore them, our tasks were to play with balls, as one would normally do at a hazardous waste site.
Playing ball in Level A PPE
Playing ball in Level C PPE
Note in the above photo, the person in the center is wearing proper head protection in the form of a straw cowboy hat. No, he actually just being fashionable. Wearing hazardous material PPE is no reason to not be fashionable.
We also did a few exercises to practice tasks at a hazardous materials site, including decontamination. There are set steps and tasks to make sure decontamination is done properly. The first pair of people wash the worker, the second pair wash the worker again, the third set inspect the cleaning, and the fourth set help the worker out of the PPE. Notice the use of walkers for the worker to hold onto while the decontamination team washes the boots. There is no dignity in any of this.
Decontamination practice
We also practiced emergency decontamination of an incapacitated worker. We actually did not finish this task. This was due to the fact that after they started decontaminating him, someone loudly said, maybe we will have to do mouth to mouth. At that point, the incapacitated worker suddenly regained conscienness and took off running.
Emergency decontamination of an incapacitated worker
Since this was practice and not a real situation, we did a few things you can’t do on a real site. For example, the decontamination team stayed inside when not needed outside and did various things to stay cool. One thing that we did was lay on the concrete floor because the concrete was cooler than the air, and it absorbed some of your body heat. Sure, we looked like casualties at a hazardous waste site, but it worked and helped keep us cooler.
Cooling off by laying on the concrete floor
We also took “hits” of the compressed air from the SCBA. The full face masks we wore were interchangeable for either air purifying filters or for the hose from SCBA. In between tasks, we didn’t wear either. However, we would attach the SCBA for short periods of time because the compressed air blowing into your mask helps to cool you.
Cooling off by attaching the SCBA to the mask
Another thing that should never be done at a real site was drinking water through the mask via a straw. Actually it might be acceptable to do this, assuming someone with clean hands put the straw in the bottle and then into your mask. It is not acceptable if you are doing this with your gloves.
Drinking water through the mask
For as hot as I was while in some of the PPE, I still had fun. I was out of the office, and that in itself was fun. Also, I learned a bit, and that is always fun.
*updated 7/20/15 after finding more ways people write CASRN or create fake CASRN that will sneak through my original macro*
I wrote a simple and fairly short SAS macro to validate CAS Registry Numbers. I have gotten enough free SAS advice and a few macros from various internet sources, so I thought it only fair to share this if it of use to anyone. Hopefully the comments give ample information about what input is needed and what the output is. The macro will catch an invalid CAS RN if it is
Information about proper CAS RNs can be found from ACS who produce CAS RNs. Contact me if you have questions about the macro or find an error with it.
*macro to determine if a CAS number is a valid CAS number;
*input is name of dataset to be examined where CAS numbers have variable name CAS_number;
*returns valid = 1 if CAS is valid and valid = 0 if invalid CAS;
*returns character variable CAS which will be CAS number with hyphens and no leading 0s;
%macro CASnumber_check(CAS_dataset);
data &CAS_dataset (drop = CAS_num CASlength R N1-N9 QR Q Rcheck j);
length CAS_num $ 10;
set &CAS_dataset;
*give CAS numbers with alphabet characters or that are blank a 00-00 CAS number;
if CAS_number = “” then CAS_number = “00-00”;
if anyalpha(CAS_number) ne 0 then CAS_number = “00-00”;
*determine if CAS is numeric or character variable;
CAS_vartype = vtype(CAS_number);
*if CAS is numeric, converts it to character;
if CAS_vartype = “N” then CAS_num = STRIP(PUT(CAS_number, 8.));
*if CAS is character, removes all non-numeric characters;
if CAS_vartype = “C” then CAS_num = compress(CAS_number,,”kd”);
*breaks CAS number apart into digits;
CASlength = length(CAS_num);
R = input(substr(CAS_num,length(CAS_num)),8.);
QR = 0;
array N_(9) N1 – N9;
do j = 1 to 9;
if CASlength > j then N_(j) = input(substr(CAS_num,CASlength-j,1),8.);
else N_(j) = 0;
QR = QR + N_(j)*j;
end;
Q = int(QR/10);
Rcheck = QR – Q*10;
*checks on validity of CAS based on check digit and length;
if Rcheck = R then valid = 1; else valid = 0;
if N9 = 0
then if N8 = 0
then if N7 = 0
then if N6 = 0
then if N5 = 0
then if N4 = 0 then valid = 0;
if CASlength < 5 then valid = 0;
if CASlength > 10 then valid = 0;
*builds character variable called CAS with no leading 0s;
if N9 ~= 0 then CAS = cats(N9,N8,N7,N6,N5,N4,N3,”-“,N2,N1,”-“,R);
else if N8 ~= 0 then CAS = cats(N8,N7,N6,N5,N4,N3,”-“,N2,N1,”-“,R);
else if N7 ~= 0 then CAS = cats(N7,N6,N5,N4,N3,”-“,N2,N1,”-“,R);
else if N6 ~= 0 then CAS = cats(N6,N5,N4,N3,”-“,N2,N1,”-“,R);
else if N5 ~= 0 then CAS = cats(N5,N4,N3,”-“,N2,N1,”-“,R);
else CAS = cats(N4,N3,”-“,N2,N1,”-“,R);
run;
%mend CASnumber_check;
I have been home from my two-week trip to Iceland for two weeks now and finished going through all the photos I took, all 4,500 of them. I pulled the best ones to post in my travel section, and looking at all the photos keeps bringing my thoughts back to Iceland. It was such an amazing trip. I saw many things I don’t normally see like puffins, whales, geysers, waterfalls, and more, more, more, more waterfalls, boiling mud pots, lava formations, beautiful coastline, a natural thermal pool in a cave, a stunningly beautiful historic site sitting at the separation of two tectonic plates, an iceberg filled lagoon at the base of a glacier, a wonderful, major tourist attraction, thermal pool made from a power plant’s wastewater, Iceland’s capital and largest city, its next largest city, several small towns, and so much more. I also experienced many adventures that I don’t normally get to do like SCUBA diving an absolutely gorgeous site in 2°C crystal-clear water and hiking up a glacier in crampons. I also, to a very small extent, got to see some of the differences between the way people in Iceland and the USA live, both from the perspective as an ordinary American and as an engineer. What do I mean, from the perspective of an engineer?
1. Most of the bridges in Iceland are one lane. I find this absolutely fascinating. They obviously did the calculations and decided that the roads, including the Ring Road, the major road that circles the island, get so little traffic that two lanes are not necessary. Also, Icelandic drivers are rather polite. You get to a bridge, and if a car is coming in the opposite direction, you simply wait until it crosses, to cross the bridge. When you approach a bridge, you slow down and make sure no one is coming or if they are, you figure out who will reach the bridge first to decide who goes first. This would never work in the USA.
Even this beautiful suspension bridge over Jökulsá á fjöllum on the Ring Road on the northeastern side of the island is one lane.
2. Even better than the one lane bridges is the one lane tunnels. I am still flabbergasted by them. There are actually a few one lane tunnels in Iceland, but the one I went through was Vestfjarðagöng. There are three roads that go into and out of Ísafjörður in the Westfjords, and all three go through a tunnel. The road that goes to the south goes through the Vestfjarðagöng tunnel. Leaving Ísafjörður, the tunnel is at first two lanes for about 2 km, and then you get to an intersection. The tunnel has an intersection. I’ve never been in a tunnel with an intersection before. It’s amazing. Then after the intersection, we kept going straight to the south. At that point, the tunnel becomes one lane with a turn off to the right every third km or so (perhaps more). I was driving, and I had to turn off several times for oncoming traffic. I must say to, in the tunnel, it was all the more difficult to determine distances and how soon I needed to pull off. This one lane tunnel lasts for about 3 km. Later that day when we were driving back to Ísafjörður, I encountered oncoming traffic once, and they pulled off before I could figure out if I was supposed to since I would have to cross their lane of traffic to do so. I am still not entirely sure what the rules of the road are in that situation. If I had known something like that existed, I would have studied on rules of the road for it. Again, one lane tunnels would never work in the USA.
3. Not all their roads are paved, and I don’t mean their tiny, never used private roads. The Ring Road is not paved in sections. I can understand from a maintenance standpoint why, but from a car maintenance and safety standpoint, I can’t.
4. They don’t really believe in guardrails for roads. There were a few spots where they actually did have a guardrail, but they were few and far between. The roads that climb up their mountains going through many switchbacks rarely have guardrails even though there are seriously steep drops on the side. The roads are even more fun when they are unpaved with no guardrails. This does force the driver to take extra care when driving, but it is still scary as hell. Of course they do have helpful little yellow, flexible markers on the side to sort of alert you to the whole don’t fall down the side of the mountain thing.
5. Not only is most electricity generated from geothermal heat, but in some places, the hot water also comes from geothermal heat. In Reykjavik, pipes deliver hot water (groundwater heated at the geothermal plant) directly to the houses and businesses. There are of course separate pipes for the cold water. How awesome must it be to not need a water heater and get endless hot water?
Those are some things that particularly fascinate me as an engineer. Some other observations include.
6. There are a lot of sheep in Iceland, and the sheep seem to regard fences are mere suggestions. The rural areas of Iceland (i.e. the vast majority of it) has a lot of farms with sheep and other animals. The farms have lovely fences. Most of the animals are in fact behind the fences. However a certain percentage of the sheep don’t really care to be fenced in. As we drove the Ring Road, we constantly saw sheep between the road and fence where the majority of the sheep were safely grazing. We never saw sheep in the road, so evidently the sheep are fairly smart, but still, we found the number of the sheep outside the fence to be funny.
7. Iceland is the land of waterfalls. You can’t go five minutes without seeing one. After a while, you start to ignore the ones that aren’t really big or have some unique feature. We saw so many waterfalls that we started driving right past the “normal” ones. These normal ones being ones that in many places would be their own tourist attraction. We passed many farms with a waterfall in their backyard. The beauty was insane.
8. Shops in Iceland have shorter business hours and are only open from about 9 or 10 a.m. to 5 or 6 p.m. This did not appear to be a thing that changed once it was officially tourist season. While I appreciate the employees and owners wanting a normal work day, from the perspective of a tourist, it was really annoying because if you are sightseeing all day, by the time you return, everything is closed. You need to leave a day to just shop.
9. Food is really expensive there, but the food is wonderful. Also, everyone in Iceland seems to make incredible bread. Also, the Skyr yogurt is awesome. Really, pretty much all the food was great.
10. Icelanders are very nice and helpful. The vast majority of them speak English and are patient, helpful, and have a sense of humor about people trying to say a word or two of Icelandic and, at least in my case, failing miserably. Side note: We read that the closest English way to pronounce Eyjafjallajökull, the volcano that erupted there in 2010 and messed up air traffic across the globe, is “hey I forgot my yogurt.” I relayed this to an Icelander who laughed a great deal and said that was actually not a bad way to learn to say it.
11. There is evidently very little crime in Iceland. I saw a total of 8 police cars the entire time I was there. In several cities, we did pass what was clearly the police station, but seeing an actual police officer or car was rare.
In summary, Iceland is incredible. Go visit if you can.
My flight back home from Iceland flew over the southern tip of Greenland. It was an afternoon flight, and it was an almost cloudless sky. Luckily I had a window seat and my camera at my feet. Actual, it wasn’t luck. I always get a window seat if I can. Also, I trust neither the TSA nor any airline with my camera, so it is always carried on the plane. Greenland is gorgeous from above. Not so sure I want to visit though, maybe, for a short visit sometime. I’ve been to Antarctica, so perhaps I should venture to the arctic also.
Ice spreading west from Greenland
Sea ice meets land
Western edge of Greenland
Ice breaking off glacier
Glacier ending at water, note water color change
The mountains in this area had little snow
Ice floating on water
Day 3 in Iceland was spent in the Golden Triangle, visiting Geysir, Gullfoss, Bruarfoss, and Þingvellir National Park. We ended the day at Þingvellir, which I later returned to at the end of our trip. While at Þingvellir that day, I dove Silfra, which is a part of Þingvallavatn (Thingvallavatn). Silfra has crystal clear water that sits between high rock walls. Those rock walls represent the spreading of the North American and Eurasian tectonic plates, and in one place, a diver can reach out and touch both plates, which makes for very fun and memorable photos. At the end of this post is a photo of me doing just that. The canyons are somewhat disconnected, and the route through Silfra consists of swimming between deep canyon walls then turning through very shallow portions, of less than a meter, then back to a deep canyon, then shallow, etc., until it ends with a wide open plane. There is very little life in Silfra, except some algae. Perhaps some animals are there, but I never saw any. This was one adventurous thing that I decided I had to do if I was going to Iceland, and I got my dry suit SCUBA certification just to do it because the water in Þingvallavatn stays 2-4°C year round. I dove that day with Dive.Is. All the photos below are my own, except the ones which feature me. I purchased those photos through Dive.Is.
Silfra from above water
Canyon in Silfra. In the middle of the photo is the place where a diver can touch the North American and Eurasian tectonic plates.
Canyon in Silfra
Canyon in Silfra starts to become shallow
Silfra canyon side
Diver in Canyon in Silfra
Silfra canyon exits to a wider plane
A shallow portion of Silfra
Lava flow marks on rocks
Lava formation
Me in a deep Silfra canyon
Me taking a photo in a shallower Silfra canyon
Me taking a photo where a canyon ends. In the upper right is a diver exiting the canyon to another canyon through a shallow portion.
Me taking a photo as the canyon ends in a wider, shallow plane. I’m taking a photo that is featured above.
Me touching the North American and Eurasian tectonic plates
Iceland has very few trees, yet it is incredibly lush due to all the moss and lichen that cover, well, everything. Most of the lava rocks are covered with soft green moss, or possibly lichen. I have yet to identify the actual kingdom, much less species, of the “living stuff growing on the rocks” that I photographed. Whatever the stuff is, it is gorgeous. It also gave me a great reason to play with my new macro lens. If anyone who reads this can identify what I photographed, even if only to narrow it down to fungus, plant, or lichen, I would be grateful if you would leave me a comment. I would really like to know what they are. Edited to add: Here is a link to an interesting article about the ecosystem consisting inside glacier mice.
Glacier Mice
Rock covered with moss and lichen near Svartifoss
Moss near Skogafoss
Red and Purple Moss near Skogafoss
Orange and black Lichen
Lime green Lichen
Moss near Blue Lagoon